Currently Browsing: Carpentry

Important Things You Never Knew About Your Table Saw

The table saw is an excellent woodwork tool to make straight cuts. You can cut by going partway through the wood and even do cutoffs. It allows accurate cutting at the exact same width or distance and gives you perfect angular cuts. However, the best way to get the maximum benefits from your table saw fence is to keep on exploring possibilities and finding out more about its abilities. Here are some things that you didn’t know about your table saw fence system:

The Two Different Types of Saws

There are two types of table saws, namely cabinet and contractor. Cabinet saws generally have a built-in enclosed cabinet base which makes them quieter and comparatively easier to use for dust collection. Contractor saws, on the other hand, are lighter and cheaper and are usually built to be easily portable. They also have less power.

Compared to the contractor saws, cabinet saws are more precise and have larger tables. They are far more expensive and are not portable. Table saw fence reviews suggest that cabinet saws are used mostly in permanent prop shops as the contractor saws aren’t sturdy enough to handle full sized sheet goods on their own.

Some Important Things to Keep In Mind

When it comes to using a table saw fence system there are some things that you never knew you had to take care of. There are some people for whom safety gear means protective eye gear and gloves. But using gloves while operating a saw can be hazardous as the material can get stuck in the machinery and you may risk losing your fingers. Also, surprisingly one of the most common causes of table saw injury is the kickback i.e. when the saw may catch the material and throw it back at you forcefully. Keep these in mind for a safer experience with woodwork!

Facts about Edge-Routing That You Need To Know

Woodworking work is a work that requires tremendous attention and precision from the woodworker’s end, so that they can bring out a beautiful piece of art on the wood.  Whether it’s the art of making guitar or door panels or intricate carvings on cabinet doors, a wood router is a crucial tool that must be present in your workshop.

Before buying the tool, the workers must go through the various wood router reviews that can help them to narrow down on the best models available in the market.

In fact, there are many uses of the best wood router that you could even think of. If you are a novice and want to learn the art of cutting flawless dadoes and rabbets in a perfect pattern then read on the rest of the blog.

Edge Routing

The key for routing clean edges is to use a sharp bit and then running the router in the counterclockwise direction on the top of the work piece. Sometimes the counterclockwise may not provide the perfect cut. Thus, this problem can be easily solved by climb-cutting on the end of the grain at southeast and northeast corner of the board. After that, you can start from anywhere on the work piece and move it in the counterclockwise direction.

Narrow Stick Edge Routing

For routing, the clean edge profile of a narrow piece of wood of the clamps often creates problems as it can rock the surface constantly. To avoid it screwing a support board of same thickness as the work piece can be helpful. A stop to the bench must be screwed to prevent it from slipping.

For any kind of woodworking projects, cuts and patterns are very important. Before starting any project it is vital to go through the various hacks that are available for the router devices. The hacks will teach you how to use the tools efficiently.